8/18/2023 0 Comments Freebsd minicom![]() ![]() Typically used in this field since users may dial up with practically any type of The third field is the type of terminal usually connected to that tty line. TheĢ86 PC uses no parity and connects at 19200 bps. When setting the getty type in the /etc/ttys file, make sure that the communications settings on theįor our example, the Wyse-50 uses no parity and connects at 38400 bps. OfĬourse, you can add your own entries to this file. There is a std entry for each bps rate from 110 to 115200. In almost all cases, the entries that start with the text std will work for hardwired terminals. The file /etc/gettytab contains lots of entries for terminal The getty program reads theseĬharacteristics from the file /etc/gettytab. A getty type configures characteristics on the terminal The getty program accepts one (optional) parameter on itsĬommand line, the getty type. User name and then executes the login(1) program. getty initializes and opens the line, sets the speed, prompts for a The second field is the command to execute for this line, which is usually getty(8). The first field normally specifies the name of the terminal special file as it isįound in /dev. The remaining subsections describe each kind. You can turn what might otherwise be a single-userĬomputer into a powerful multiple user system.įor FreeBSD, there are three kinds of terminals: PC or a Macintosh® can be a terminal wired into a more ![]() For a home user, a spare computer such as an older IBM ![]() Program that you would normally run on the console or in an xterm window in the X Window System.įor the business user, you can attach many terminals to a FreeBSD system and place Using a terminal attached to an unused serial port, you can log in and run any text Today's PCs have consoles capable of high quality graphics, but the ability toĮstablish a login session on a serial port still exists in nearly every UNIX style operating system today FreeBSD is no exception. It is quite similar to using a modem and terminal software toĭial into a remote system to do text-only work. Instead, people logged in and ran programs through terminals that were connected to theĬomputer's serial ports. The original UNIX® systems did not have consoles. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |